Showing 1–12 of 27 results

  • CGEM II Computerized Mount

    AED 10,360.00
    • 40 lbs payload capacity
    • Dual-fit Vixen/CG-5 and Losmandy/CGE dovetail saddle
    • 2″ steel legs with height index marks for quick leveling
    • USB 2.0 port on hand control for direct links to a PC via ASCOM supported software.
    • Internal cabling throughout for worry-free remote operation
    • Low cog DC Servo motor with integrated optical encoders offer smooth, quiet operation
    • Built-in polar alignment program to polar align on any star in the sky
    • Longer clutch levers to make tightening and loosening of clutches easier
  • CGX Computerized Mount

    AED 12,234.00
    • Increased load capacity to 55 lb
    • Heavy Duty belt-drive system minimizes backlash while providing smooth motor operation under heavy loads
    • Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
    • Internal cabling for worry-free remote operation. Power input and accessory ports remain stationary while the mount slews to avoid snags
    • Control software developed in conjunction with PlaneWave Instruments for professional level control operation and imaging
    • Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
    • 2″ steel legs with height index marks for quick leveling
    • Two handles for easy pickup and transport
    • Ergonomically designed dovetail clamping knobs
    • Ergonomic latitude adjuster for smooth and easy adjustment under full loads
  • CGX-L EQ Mount

    AED 17,972.00
    • Increased 75 lb load capacity. Exceptional load capacity to weight ratio
    • Additional Aux accessory ports and autoguider port on the Dec axis for better cable management
    • Larger 144mm diameter worm wheels to better and more accurately drive heavier loads
    • Longer 270mm dovetail saddle to better support larger optical tubes
    • Massive 70mm stainless steel tripod legs with a wider stance for improved stability under heavy loads
    • Accessory tray holds three 1.25” and two 2” eyepieces with an upright stand for your smartphone or tablet
    • Heavy duty, 31.5mm stainless steel counterweight shaft to support additional counterweights
    • Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
    • Internal cabling for worry-free remote operation. Power input and lower accessory ports remain stationary while the mount slews to avoid snags
    • Includes Celestron’s PWI telescope control software, co-developed by PlaneWave Instruments. Software features multi-point mount modeling for extremely precise pointing accuracy
    • Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3°-65° latitude range
    • Integrated handles for easy transport and portability
    • Ergonomically designed dovetail clamping knobs
  • Piggyback Mount – NexStar 5, 6, 8

    AED 122.00
    • A piggyback ride for your camera!  Let your telescope do the driving while your camera takes beautiful wide-angle images of the sky.
    • Use your own camera lenses to take photographs of the Milky Way, nebulae, the Moon, and more
    • Attaches easily to the top rear of any Schmidt Cassegrain telescope in minutes
  • Dovetail Bar – 8″ – CG5 (Narrow)

    AED 131.00
    • Fits pre-drilled holes in the front and rear cells of current 8” Schmidt-Cassegrain and 8” EdgeHD Optical tubes
    • Aluminum bar with orange anodizing provides a sturdy mounting platform.
    • Easy to install and comes complete with all necessary hardware
  • Dovetail bar (CGE), 8″

    AED 188.00

    Please note that this product will not work with CPC 800 GPS or CPC Deluxe 800 HD telescopes without completely removing the finder scope bracket.

  • Dovetail Accessory Bar – RASA 8

    AED 282.00
    • Dovetail bar connects to the top of the Rowe-Ackermann Schmidt Astrograph 8″ to attach accessories to the optical tube.
    • Dovetail bar is the same as the bar on the bottom of the RASA 8″ optical tube.
    • Aluminum body provides a sturdy platform for accessories, matches the dovetail mounting bar on the RASA 8″.
    • Installs easily into existing threaded holes in the RASA 8″ and comes with all mounting hardware required.
    • Accepts accessories that can mount onto CGE or Losmandy-D dovetail plates.
  • Dovetail Bar – 9.25″ – CG5 (Narrow)

    AED 162.00
    • Fits pre-drilled holes in the front and rear cells of current 9.25” Schmidt-Cassegrain and 9.25” EdgeHD Optical tubes
    • Aluminum bar with orange anodizing provides a sturdy mounting platform.
    • Easy to install and comes complete with all necessary hardware
  • Dovetail bar (CGE), 9.25″

    AED 249.00

    9.25-inch Dovetail bar (CGE)

  • Dovetail Bar – 11″ – CG5 (Narrow)

    AED 179.00
    • Fits pre-drilled holes in the front and rear cells of current 11” Schmidt-Cassegrain and11” EdgeHD Optical tubes
    • Aluminum bar with orange anodizing provides a sturdy mounting platform.
    • Easy to install and comes complete with all necessary hardware
  • Dovetail bar (CGE), 11″

    AED 249.00

    11-inch Dovetail bar (CGE)

  • Dovetail bar (CGE), 14″

    AED 334.00

    14-inch Dovetail bar (CGE)